/ Views: 85265

Three ways to remove the rivet

Many industrial products use rivets as a way to reliably and quickly fasten a knot that will not be later disassembled. Often so connect thin sheet metals. If you have a need to remove the riveting and not damage the surface of the product, then I will offer all three available methods to achieve the desired result.

Rivet Drilling

The simplest and safest way from a mechanical point of view Impact, this drilling drill.
Three ways to remove the rivet
Take a screwdriver or a drill. Install the drill of the desired diameter. And drill through riveting.
Three ways to remove the rivet
Passing through.
Three ways to remove the rivet
This method will not damage the metals being joined if the drill bit is selected correctly. Although it is quite specific and will not suit you,if your rivets have a semicircular cap.

Bulgarian cutting

This is the fastest and at the same time the most traumatic way to remove rivets. Therefore, if you are unsure of owning a tool like the USM, I sincerely do not recommend using it. com / uploads / posts / 2018-09 / medium / 1536576814_5.jpg "style =" max-width: 100%; " alt="Three ways to remove the rivet"> We need:
  • Bulgarian.
  • Screwdriver.
UshM cuts heads from all rivets installed. Three ways to remove the rivet And screwdriver knock them out right. Three ways to remove the rivetThree ways to remove the rivet That's the trick.
Three ways to remove the rivet
This way you can simply damage the surface of the product and break the disk itself, since the cutting is at an angle. And one wrong move can ruin everything. Be sure to use protective equipment.

Cut off the rivet head with a chisel or screwdriver

Now the way is what is called the classic.It is used by the majority of both professionals and beginners. He does not require special equipment, electricity, training. The most affordable and at the same time the slowest way to cut rivets.Will need:
  • Hammer.
  • Screwdriver or chisel. It all depends on the diameter of the rivet.
Three ways to remove the rivet
If the size is small, take a screwdriver, put it at an angle and hammer the hammer. Next, knock through the same screwdriver.
Three ways to remove the rivet
If the rivet is large, then it is better to use a chisel. We act like a screwdriver.
Three ways to remove the rivet
Also knock out with a screwdriver.
Three ways to remove the rivet
This method can be used when a little riveting: one, two or three. Or when there is nothing of the above listed equipment in the first two ways. If there are many riveted joints, it is better to use a more mechanized method of removal. Be careful when working with metals.Also share your comments in the comments, everyone will be interested. [/L_REPEAT]

Related news


Yudashkin dressed up star kids: 10 cutest photos
Bench for toys
What is useful watermelon
I am a citizen of Latvia, I am going on a trip to Russia in the summer, tell me how to get a tourist visa and how much it costs
Beautiful gift envelopes
What good is a guy to say
How to get to the Botkin Hospital
How better to warm the windows