/ Views: 44531

How to straighten a dent?

Dents on the car can appear due to various circumstances, such as an accident, hooliganism, a ball flying from children playing football on the court, unskilled parking and other unpleasant situations. Accordingly, every driver with whom such an incident happened is wondering how to correct the dent? And here there are several proven and effective ways to resort to which will be necessary depending on where it was formed.

How to straighten a dent on the wing

So, if you are interested in information on how to straighten a dent on a small wing, then it is. First, you will need to treat the surface of the dent with sandpaper. After that, it will need to be degreased and remove all particles of paint from it. Once this is done, you will need to wipe the dent dry, and then apply epoxy putty to it. At the same time, it needs to be evenly distributed and to capture a little area around the dent in order to level the surface.

As soon as the putty dries, it will need to be polished with a coarse piece of cloth. It is important that the surface becomes smooth, without any irregularities of inclusions. After that, you will need to apply paint to the treated area of ​​the wing that matches the color of your car. You can distribute it with a brush, roller, spray gun or foam sponge. Then you just have to wait for the paint to dry.

How to straighten a dent in the door

If you are interested in how to straighten a dent in the door, then the course of work will be such. First of all, you will need to disassemble the door trim. After that, you will need to knock on the dent from the inside. This should be done gently and carefully. If such actions do not help, then you will need to wrap the bar in a rag and do the same to them with light, unhurried movements. You will need to do this until the surface of the metal is leveled. If the dent on the machine is too large, then a rubber hammer can also be used to level it.

Once the dent is straightened, it will be necessary to polish the surface and plaster it with a putty and primer. Then you can start painting.

How to straighten a dent without painting

If you want to get rid of such a defect without the use of paints and varnishes, then you will be interested in information on how to correct the dent without painting. In this case, you will need to arm yourself with a regular hair dryer and a balloon with compressed air, you can buy it in the auto shop. First, you will need to heat the surface of the dent with a hot stream of air. Then take a can of compressed air, turn it upside down and spray it on the heated surface with plenty of water, taking about 3 cm around it. This should be done as long as there is frost on the body. After that, you will only have to wait until the frost melts. Then you will see that behind him, the dented metal is fully straightened.


Related news

How to read tea leaves
How to update drivers on Windows 7
My daughter has an inferiority complex: how to be
10 light hairstyles for short hair every day
What is the electorate
How to know treason
How to insulate the walls from the inside