/ Views: 31182

How to connect Zyxel?

Watch the video

How to connect Zyxel?

ZyXEL is a Taiwanese manufacturer of Internet access equipment. The router of this company is popular among Russian users, since the device has established itself as a high-quality and reliable product. Today we will talk how to connect and configure the router.

Connect and configure the Zyxel router

Device connection

  1. Unpack the contents of the box and check the equipment: router, antenna, power supply unit (adapter), network cable, installation disk and user manual.
  2. Next, connect the computer or laptop to the router: plug the network cable into one of the LAN connectors on the device, and connect the other end of the wire to the computer connector on the back panel (PC) or side (laptop).
  3. Disconnect the Internet cable from the computer and connect it to the router via the WAN connector (on some models the name may be INTERNET).
  4. Next, you need to connect the power supply to the router and plug the device into a power outlet.
  5. Then go to the "Start" menu on your computer, select "Control Panel" and click on "Network Connections" with the right mouse button.
  6. Go to "Properties" and in the window that opens, select "Internet Protocol TCP / IP".
  7. Next, click on the "Properties" button located in the same window.
  8. Check the appropriate checkboxes to automatically obtain IP and DNS addresses.
  9. Click the "OK" button.
  10. Next, you need to connect the antenna to the designated slot of the router.

Device setup

  1. Open the browser address bar and type in the address 192.168.0.1 or 192.168.1.1 (depending on the device model).
  2. In the new window, enter the username - admin, password - 1234.

Internet setup

  1. Call the operator of your ISP and ask for the registration of the router. In addition, it is necessary to clarify the MAC address, username and password, as well as other settings if necessary.
  2. In the router menu, select the "Internet" tab.
  3. Next, select the type of connection in the menu.
  4. Check the box to configure the DNS address.
  5. If necessary, write down the MAC address.
  6. Click the "Save" button.
  7. Next you need to enter the IP address.
  8. Then enter the username and password that you learned from your operator.
  9. Click the "Save" button.

Wi-Fi setup

  1. In the router's menu, select the "Wi-Fi network" tab.
  2. Check the box to enable the access point (AP).
  3. Set the network name in Latin (if desired). It is not recommended to hide the network, as there may be problems in identifying the parameters.
  4. In the "Channel" you need to select the automatic connection.
  5. Check the box to enable Wi-Fi mode.
  6. Click the "Save" button.

IPTV port setup

To watch IPTV you need to configure the required port.

  1. In the menu of the router, select the tab "Home Network".
  2. Go to the IP TV section.
  3. In the "TV port", select the LAN connector.
  4. Next, select the desired connector for the IPTV receiver (if available).
  5. Click the "Save" button.

change Password

For the security of using the router, it is recommended to change the password to a personal one. To do this, do the following:

  1. In the menu of the router, select the tab "System".
  2. In the "New Password" section, enter the password consisting of Latin letters and numbers.
  3. Below, enter the combination again to confirm the password change.
  4. Click the "Save" button.
  5. Username remains unchanged - admin. A new password must be remembered or written down, as it will be needed when entering the interface.

Check settings

In order to check your settings, you need to go to the main page of the router interface and click on the "Monitor" button.

In the window that appears, you can view all the parameters set earlier.

[/L_REPEAT]

Related news


How to enter a Kaspersky key
White crochet skirt
New Zealand - a country you can not forget
Corfu - a luxury island for your trip
Secrets to help you choose a great cognac