/ Views: 72273

How to change the stove on the VAZ 2109

You will need
  • - capacity for coolant;
  • - screwdriver.
Before carrying out work, be sure to drain the coolant into the container prepared in advance through the hole that is located in the tank with liquid. Also disconnect the instrument panel. To do this, disconnect all electrical connectors and buttons from the dashboard. After that, using a screwdriver, loosen the screws a little, which will tighten the clamps of the two hoses. These hoses extend from the heater tap nozzles and pass under the dashboard inside the car.
Similarly, loosen the clamps and remove the hoses from the heater tap connections that are in the engine compartment. Unscrew the two nuts for fastening the crane. After that, disconnect it from the shield and pull out the holder of the traction. Remove the protective cover located on the gear lever to ensure free access to the lining of the floor tunnel lining.
After that, unscrew the screws that hold the cover and remove it by pulling it back. Disconnect the air duct from the body of the stove, which is responsible for internal ventilation. Find the wires that are connected to the heater motor and disconnect them. Also disconnect the wires from the resistor, which is necessary to select the fan mode. It has two spirals with different resistance, which are turned on and off when you turn the control knob.
Remove the nuts on the right side of the stove. Repeat the same operation on the left side.

Related news

A simple omnidirectional 3G 4G Wi-Fi antenna
What can you make a doll
The scenario of the New Year for children: a scenario of a fairy tale for the New Year 2015
What is strictly forbidden to do after a visit to the beautician
Merry cotton snowman
How to download a video without a program