/ Views: 63534

Restoring the bath with liquid acrylic with your own hands

Liquid acrylic is a modern material with which you can perform a qualitative restoration of the bath with your own hands. Consists of the basis having rather high density, and a hardener. Can be used for the restoration of steel, cast iron and acrylic baths.
Do-it-yourself restoration of a bath with liquid acrylic

Materials and tools

For bath restoration, you will need liquid acrylic liquid, tools for cleaning plumbing and degreasing, soda. Please note that liquid acrylic is sold in containers designed for bath sizes - 1.2, 1.5 or 1.7 m.
Restoration bath with liquid acrylic do it yourself
Need to prepare a tool for work:
  • Bulgarian;
  • drill;
  • nozzle-whisk;
  • pliers;
  • sandpaper of various grain sizes;
  • rubberspatula;
  • respirator;
  • vacuum cleaner;
  • sponge;
  • gloves;
  • flashlight.
Restoration of the bath with liquid acrylic with your own hands
When using a drill, you will need a special nozzle to grind the surface of the bath. Note:a construction dryer and a stationery knife will be useful for removing non-factory enamel, if the bath has previously been restored. You also need polyethylene to protect the floor and walls (you can use rags or newspapers).

Bath preparation

The appearance and the service life of the applied coating will depend on the quality of the preparation. First, overflow and drain are removed. Grinder or drill with a nozzle for grinding must carefully treat the surface of the bath. Emery paper for rough work 40-H or 32-H (according to GOST 3647-80) is used for this. Emery will help remove and the resulting water raids. The surface after grinding should be rough to ensure good adhesion of liquid acrylic.
Restoration bath with liquid acrylic do it yourself
Restoration of the bath with liquid acrylic do-it-yourself
Note: not factory enamel, applied earlier for the restoration of the bath,removed with a stationery knife after heating with a hairdryer.
Restoration bath with liquid acrylic do it yourself
Restoration bath with liquid acrylic do it yourself
The bath needs to be cleaned and the remnants of the garbage should be washed off. Then the surface is treated with a plumbing cleaner - the poured sponge should be spread over the entire bath surface, including the installation location of the removed overflow.
Restoration bath with liquid acrylic do it yourself
Restoration bath with liquid acrylic do it yourself
The bath is washed again and left to dry. After drying, proceed to the next important stage of work - degreasing. Soda is poured into the bath and large sandpaper is carefully ground over the entire surface.
Restoration of the bath with liquid acrylic with your own hands
Perhaps, it will be necessary to carry out the degreasing not one, but two or three times. It is necessary to work in gloves. Then the bath is thoroughly washed with a stream of water from the shower. "style =" max- width: 100%; " alt="Restoring a bath with liquid acrylic with your own hands">
Before the next stage you need to remove the siphon. Restoring a bath with liquid acrylic with your own hands The location of the siphon must be cleaned, degreased and rinsed with soda residues.Restoring the bath with liquid acrylic with your own hands The mixer and the shower are covered with a packet and fixed with an adhesive tape - water should not get on the applied layer of liquid acrylic until it is completely dry. Tiles and shelves above the bathroom cloth are cleaned from dust particles. Do not allow the grinding dust to get on the acrylic.
Restoring a bath with liquid acrylic with your own hands
Restoration of the bath with liquid acrylic with your own hands After this stage is completed, the bath must be thoroughly dried with a hairdryer. Particular attention is paid to the places where water can collect: tile and bath joints, under the rim, which is installed at the junction of the tile and bath. It is better to remove the side and to restore the bath without it. Available at the junction with the bathroom cement joints are well dried with a hair dryer.
Restoration bath with liquid acrylic do it yourself
Do-it-yourself restoration of the bath with liquid acrylics
To remove defects in the factory enamel (cracks, chips), use a fast-drying automotive putty.
Restoration of the bath with liquid acrylic with your own hands
The composition is stirred and put on the damaged areas with a rubber spatula, then allowed to dry.
>img src="https://sdelaysam-svoimirukami.ru/uploads/posts/2018-06/medium/1530340048_19.jpg" style="max-width: 100%;" alt="Restoration bath with liquid acrylic do it yourself">
Restoration of the bath with liquid acrylic with your own hands
While the putty dries, cover the floor under the bathroom and the tile at the joints with polyethylene or newspapers that are fixed with adhesive tape.
Restoration bath with liquid acrylic do it yourself
So when pouring liquid acrylic will not spoil the floor and wall tiles. After the putty has dried, these places pass through fine sandpaper. Vacuuming removes dust particles from the bath.
Restoration of the bath with liquid acrylic with your own hands
A means for degreasing (with acetone) wipe the place of putty cracks and chips.Wipe with acetone should also be installed overflow and siphon. A container is placed under the drain hole (a cut plastic bottle can be used). Excess liquid acrylic will flow into this container.
Restoring a bath with liquid acrylic with your own hands

Coverage

After completing the preparatory work begin preparing liquid acrylic. A hardener is added to the material in parts and mixed thoroughly with a drill with a whisk nozzle.
Restoring the bath with liquid acrylic with your own hands
We need to achieve complete mixing of the two components, not forgetting the material in the corners and at the bottom of the cans of liquid acrylic. Otherwise, the layer of applied acrylic will dry unevenly. Stir the composition for 10 minutes. Important!Do not forget about the viability of the finished mixture, which is indicated on the package. During this time, you need to completely complete the work. Before pouring, the composition is allowed to stand for 5-10 minutes. To work, you need a plastic container, which is poured acrylic. You can use a cropped and well-wiped bottle from under the hardener.Work is carried out in medical gloves. Note:adding a color paste will get the desired color of the composition. Color paste should not exceed 3% of the total weight of the composition. The composition is poured around the perimeter of the bath from top to bottom.
Restoration bath with liquid acrylic do it yourself
Restoration of the bath with liquid acrylics with your own hands
Going down, they help themselves with a rubber trowel, which they rubbed into the surface of the bath with acrylic. Having achieved full coverage with liquid acrylic, the spatula makes zigzag movements along the bottom of the bath. Then the composition is leveled in smooth movements from the wall towards the drain.
Restoration bath with liquid acrylic do it yourself
Restoration bath with liquid acrylic do it yourself
Restoration bath with liquid acrylic do it yourself
Leave the bath for 5 minutes. The light is turned off and using a flashlight, the surface of the bath is checked for defects or irregularities (stains) that need to be leveled with a spatula.
Restoration bath with liquid acrylic do it yourself
Restoration bath with liquid acrylic do it yourself
Important!When mixing the composition could form air bubbles. To remove these bubbles, the surface of the bath is blown with quick motions with a hair dryer at low speed. After 10 minutes using a flashlight, the surface is checked again. The bathroom can be used in 24-48 hours after complete drying. Up to this point the bathroom should be closed. The drying time of the composition depends on the technical characteristics of the material and the temperature conditions in the room. Note: some modern liquid acrylics dry 12-16 hours.
Do it yourself liquid acrylic restoration

Work result

As a result of this work, you will receive a fully restored bath with a beautiful appearance that is guaranteed to last at least 10 years. After each use, the bath should be cleaned with special care products for acrylic, dishwashing detergents or liquid soap. DIY restoration with liquid acrylics

Pros and cons

Advantages of bath restoration with liquid acrylic:
  • long service life;
  • beautiful appearance;
  • smooth surface;
  • excellent performance, first of all mechanical strength;
  • possibility of re-restoration in the future.
The bath after restoration will be almost as good as a new bath. The disadvantages of this technology include:
  • the long time it takes to complete Ania surface;
  • a peculiar odor during application and drying of liquid acrylic;
  • the need to buy means for care of the bathroom.

Tricks in work

When applying the composition, a high-quality surface of the bath is obtained in an even thick layer. Acrylic must independently flow down. Determine the middle of the side slopes by eye and pour the second portion of the composition onto them. The remaining material is poured to the bottom. So the entire surface of the bath will be covered with a thick layer of acrylic. [/L_REPEAT]

Related news


Why no sales
What is invasion
Publications by Natalia Taraskina
People who are over 40, how did you get to know when there was no internet :-) And just how did you live without it
Why am I ugly
How long does chickenpox last?
Motives for marriage in men and women